• Home
  • Engineering
  • Slabs bonded on over‑coat
UltracCladding

ULTRACLADDING

Laminated panels: the innovative UltraCladding system combines the benefits of the external coat with the extraordinary technical characteristics of porcelain stoneware.

agganci-invisibili-prova03

WHAT IS ULTRACLADDING

UltraCladding is the innovative coat system for glued facades in which the EPS insulation is pre-accoupled to the porcelain stoneware slabs. With this system that combines the benefits of the external coat with the extraordinary technical characteristics of porcelain stoneware, Italgraniti Group allows to cover the facade quickly and easily

Download Brochure
Contact us
facciate-agganci-visibili-01

What makes UltraCladding unique is the double safety system: the ceramic slab, in fact, is applied to the EPS panel, which is anchored to the building both by bonding with double coating (of the insulating panel and the wall support) than by means of mechanical safety anchors. In this way, the risk of module detachment due to glue-related problems is reduced to zero. Thanks to UltraCladding the same porcelain stoneware finish characterizes the entire facade of the building. In fact, the system includes special pieces, such as window sills and window covers.

THE ADVANTAGES OF ULTRACLADDING

agganci-invisibili-prova03

THE ADVANTAGES OF ULTRACLADDING

UltraCladding reduces the number of hours of use of the heating system, allowing you to save fuel and reduce pollutant emissions. In addition, it eliminates thermal bridges, all those areas of the building envelope (such as external edges, walled pillars, window perimeters) in which it is easier to form damp spots and mold.

APPLICATION

ultracladding
1. Verificare la planarità del supporto murario con una staggia da 250 cm ed una livella a bolla.
ultracladding2
2. Nel caso sia presente un muro intonacato verificare la tenuta dello strato superficiale, e se necessario, eliminare e ripristinare i punti critici.
ultracladding3
3. Fissare il profilo di partenza al supporto murario in maniera perfettamente planare tramite appositi tasselli a testa piana. Si consiglia di tenere una distanza dal terreno di circa 5 cm.
ultracladding4
4. Preparare il collante con classificazione C2TES1 ed applicarlo tramite una spatola dentata da 10 mm con la tecnica della doppia spalmatura.
ultracladding5
5. Applicare il pannello al supporto murario precedente verificato e spatolato con collante, utilizzando il profilo di partenza come base per l’allineamento. Fissare il pannello con appositi tasselli ad espansione in base al tipo di supporto al muro avendo cura di non avvitare troppo il tassello per non disallinearlo rispetto alla muratura.
ultracladding6
6. Applicare le staffe in acciaio sul lato sinistro del pannello in modo da collegare tutti i pannelli.
ultracladding7
7. Attendere l’asciugatura del collante e rimuovere i livellatori
ultracladding8
8. Infine applicare lo stucco poliuretanico e pulire accuratamente la facciata.

Contact the Engineering Division to receive technical support or to request a quote:

Privacy Policy *
Form by ChronoForms - ChronoEngine.com